MatsP
November 9th, 2004, 09:41 AM
Sorry to hear about your problem with the D70...
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
I don't know anything in detail about D70, as I'm a Canon man myself...
But some general thoughts and ideas:
1. From the behaviour, I would think that something has gone wrong with either the RAM or the ROM(flash) in the camera. This would cause a similar thing to a "Blue Screen of Death" that you get on a PC sometimes when something has gone wrong somewher. In a machine like a digital camera, the most sensible thing to do to try to recover is to "reboot", or put another way, reset the camera.
2. It is possible that it's just a "transient problem". Have you tried removing the battery for a longer period of time (at least half an hour), and also, if there is a small battery for keeping the time when changing batteries etc. (don't know if the D70 has one, the Canon ones does), you may want to remove that too to be sure that the camera is "properly powered off". This may of course reset some of your personal settings and definitely should reset the time/date in the camera, but I'm sure you can live with that.
3. It may be possible to "reprogram the flash" using the standard procedure for updating the firmware in the camera. *** I would only do this as a "last ditch attempt" ***. I don't know how this is done, but I'm pretty sure there is a way to load a new set of firmware onto the camera some way. But if it's the RAM that is broken, this may cause the firmware update to fail and that may cause even worse scenario than what you've got, so I would only do that if you think that "Things can't get much worse". This is akin to a PC being re-installed from scratch. Like the PC case, it doesn't actually help much if the actual cause of the problem isn't the software/firmware itself. Don't blame ME if this doesn't help, and it makes things worse!
I hope some of this is of help, if nothing else, to understand what the problem is.
If it really is the RAM that is busted, it's probably going to be fairly expensive, as I don't expect the repairer will replace the individual parts, but rather just swap the whole PCB, which means "all the guts of the camera".
If, on the other hand, it's just the flash that's gone crazy, then it's most likely just a question of "factory programming it", which would be a relatively trivial operation, and shouldn't cost much to fix.
--
Mats
wallpaper veritas aequitas tattoos.
freeskier89
01-02 02:29 AM
Megaswf.com seems to work :)
snathan
02-17 09:06 PM
Do I need recent salary slips for transfer ?
Yes you need.
Yes you need.
2011 veritas aequitas tattoo.
lee.cook
May 20th, 2007, 12:09 PM
Hello,
OK so today I went out with my father to take some images in the countyside, got home, looked on the PC, and there is dust spots in the image!
So I took a few more images of the sky (this seems to show up easily) and its still there.
I took my lens off, and had a look in and there is loads off dust, I tried using little brush to get some off the dirt off, but its still there.
I feel stupid about this, but, where is the sensor ? I can only see 2 mirrors, one I believe is the focus mirror.
I found another mirror behind another mirror and believe its the sensor but unsure.
I read that cleaning the mirrors has nothing to do with the output off the final image.
This is what my image dust looks like.. http://img444.imageshack.us/img444/886/dsc1723hl7.jpg
http://img444.imageshack.us/img444/6991/dsc1208am4.jpg
As you can see, there is a dust spot in the upper top half off the picture.
Could anybody recommend any cleaning solutions for this, I really need my sensor clean by Saturday as the start of the Isle of Man TT practice is here :)
I can provide pictures if needed, thanks for reading.
OK so today I went out with my father to take some images in the countyside, got home, looked on the PC, and there is dust spots in the image!
So I took a few more images of the sky (this seems to show up easily) and its still there.
I took my lens off, and had a look in and there is loads off dust, I tried using little brush to get some off the dirt off, but its still there.
I feel stupid about this, but, where is the sensor ? I can only see 2 mirrors, one I believe is the focus mirror.
I found another mirror behind another mirror and believe its the sensor but unsure.
I read that cleaning the mirrors has nothing to do with the output off the final image.
This is what my image dust looks like.. http://img444.imageshack.us/img444/886/dsc1723hl7.jpg
http://img444.imageshack.us/img444/6991/dsc1208am4.jpg
As you can see, there is a dust spot in the upper top half off the picture.
Could anybody recommend any cleaning solutions for this, I really need my sensor clean by Saturday as the start of the Isle of Man TT practice is here :)
I can provide pictures if needed, thanks for reading.
more...
Ramba
04-16 02:42 PM
http://answers.yahoo.com/question/index?qid=20070311145154AA9x6Th
http://www.city-data.com/forum/houston/
There are many good things.
1. cheap real estate.
2. diversed (for desis)
3. No state dox.
Bad things.
1. Hot and humid
2.high propert tax (3-4%)
3. High enery cost due to hot wether through out year. (average 300$-400$ for electric bill for 2500sq.ft house)
4. Hurricane and flood possibilites..
http://www.city-data.com/forum/houston/
There are many good things.
1. cheap real estate.
2. diversed (for desis)
3. No state dox.
Bad things.
1. Hot and humid
2.high propert tax (3-4%)
3. High enery cost due to hot wether through out year. (average 300$-400$ for electric bill for 2500sq.ft house)
4. Hurricane and flood possibilites..
arunmohan
04-08 03:35 PM
Please refer to my signature for PD
more...
prdgl
02-10 09:43 PM
Hi,
I am with employer A (he is good except that he doesn't like me talking to the attorney directly about GC process. I have to go through him for every single details and he is busy usually so contacting him is also a bit pain. Because of this my process is getting delayed sometimes).
Having said this, I joined this employer A in 2004 after I graduated and i am with him for 2.5 yrs since then. Now I am starting my GC process and I cannot show this 2.5 yrs of experience to my LC process (which is logical). On the other hand, I found another employer B who is willing to process my GC with one of the top attorneys.
So if i switch now, I will
1. Be able to apply for EB2 (MS + 2.5yrs + 1 yrs(before MS) = MS + 3.5yrs)
2. I get a very good attorney to file my GC
3. I will be able to have a direct conversation with the attorney (employer said its between me and the attorney)
If I don't switch, my odds are that
1. I have to go with Eb3 (MS + 1 yrs(before MS) = MS + 1yr)
2. Can't talk to the attorney directly
So IS IT WORTH switching the employer for
1. Gettting into EB2
2. Getting a good attorney to file my LC
3. Be able to talk to attorney directly
Your thoughts and suggestions are highly important. So please let me know what you will do if this is the case ?
Thanks
I am with employer A (he is good except that he doesn't like me talking to the attorney directly about GC process. I have to go through him for every single details and he is busy usually so contacting him is also a bit pain. Because of this my process is getting delayed sometimes).
Having said this, I joined this employer A in 2004 after I graduated and i am with him for 2.5 yrs since then. Now I am starting my GC process and I cannot show this 2.5 yrs of experience to my LC process (which is logical). On the other hand, I found another employer B who is willing to process my GC with one of the top attorneys.
So if i switch now, I will
1. Be able to apply for EB2 (MS + 2.5yrs + 1 yrs(before MS) = MS + 3.5yrs)
2. I get a very good attorney to file my GC
3. I will be able to have a direct conversation with the attorney (employer said its between me and the attorney)
If I don't switch, my odds are that
1. I have to go with Eb3 (MS + 1 yrs(before MS) = MS + 1yr)
2. Can't talk to the attorney directly
So IS IT WORTH switching the employer for
1. Gettting into EB2
2. Getting a good attorney to file my LC
3. Be able to talk to attorney directly
Your thoughts and suggestions are highly important. So please let me know what you will do if this is the case ?
Thanks
2010 veritas aequitas tattoo.
drona
08-08 01:37 PM
Southern California IV members,
There are several action items that we are currently working on in the Southern California group including meeting with our lawmakers, membership drive events and getting together volunteers to make calls for the DC Rally. We urgently need active participants to help us carry out these action items. Please contribute your time and effort so that IV can succeed in resolving our issues.
For more information, join us at our yahoo group:
http://groups.yahoo.com/group/SC_Immigration_Voice/
There are several action items that we are currently working on in the Southern California group including meeting with our lawmakers, membership drive events and getting together volunteers to make calls for the DC Rally. We urgently need active participants to help us carry out these action items. Please contribute your time and effort so that IV can succeed in resolving our issues.
For more information, join us at our yahoo group:
http://groups.yahoo.com/group/SC_Immigration_Voice/
more...
amitjoey
05-28 12:27 PM
Greatly apprecite if anyone can give their inputs...
I have PD with dec 2006 and 140 approved. Filed 485 in July 2007. For october 2008 I will be done with 4 years of H1b. I am single and I may not get married untill later 2009 due to some family responsibalities. I am kind of concered about 485 getting approval by then which might jeoperdise my spouse visa later. Based on the present processing speed, mine might take minmum 2 years. But bit concerend what if USCICS make a mistake in processing 485 in terms of picking 485 from a later date and approving it?
So my query is...
1. If I now withdraw my 485 and later change company. SHould I again get a new labor and i140 approved with new company to file for 485.( Here I understand I can port my PD.).
Any inputs will be greatly apprecited....
PD With DEC 2006: IF you are from a retrogressed country, unless there is any overhaul in the precent process, or new visas added by way of new laws, you are looking at atleast 3 years of wait. Why would you want to withdraw it right now, wait for another 2-1/2 years. If suddenly you notice the dates jumping, then you can decide to withdraw.
In the meantime, get 3 years extension on your H1, based on approved I140.
Check w/lawyer.
I have PD with dec 2006 and 140 approved. Filed 485 in July 2007. For october 2008 I will be done with 4 years of H1b. I am single and I may not get married untill later 2009 due to some family responsibalities. I am kind of concered about 485 getting approval by then which might jeoperdise my spouse visa later. Based on the present processing speed, mine might take minmum 2 years. But bit concerend what if USCICS make a mistake in processing 485 in terms of picking 485 from a later date and approving it?
So my query is...
1. If I now withdraw my 485 and later change company. SHould I again get a new labor and i140 approved with new company to file for 485.( Here I understand I can port my PD.).
Any inputs will be greatly apprecited....
PD With DEC 2006: IF you are from a retrogressed country, unless there is any overhaul in the precent process, or new visas added by way of new laws, you are looking at atleast 3 years of wait. Why would you want to withdraw it right now, wait for another 2-1/2 years. If suddenly you notice the dates jumping, then you can decide to withdraw.
In the meantime, get 3 years extension on your H1, based on approved I140.
Check w/lawyer.
hair Turn it over: Veritas.
AB1275
12-17 11:00 PM
I was in kind of simmilar situation in April 08 .I found out online that my 140 /485 denied on april 18th .called my lawyer and statred counting days to find out why .Neither My attorney.employer or me got any denail notice till may 15 .meanwhile i had mad multiple call to NSC.finally I got denail notice on my home address thu it was supposed to go to attorney .Any was they asked for same things what they wanted from u .My employer was in process of audit but i had only 4 days to file MTR .
Now answers to ur quiries
1-Read denail notice they may give option of MTR .My MTR got approved in 2 months .I gues Apeal takes longer time
2-Can u send W-2 later? .what i did at that time was called NSC to ask .They said take info pass n go to local offive .i had 4 days .took info pass same day n drove about 150 mils to local office .There head of that place told me to file MTR with what ever u have and write them letter to buy more time for other docs and make sure u file MTR with in 30 days .
I sent unauditted statements but my W2 nad paystubs were way more then i was supposed to get .
Wish u luck
Thank you for ur post. I checked my denial notice. There is no mention of MTR. It mentions that I can file an appeal with AAO within 30 days.
Now answers to ur quiries
1-Read denail notice they may give option of MTR .My MTR got approved in 2 months .I gues Apeal takes longer time
2-Can u send W-2 later? .what i did at that time was called NSC to ask .They said take info pass n go to local offive .i had 4 days .took info pass same day n drove about 150 mils to local office .There head of that place told me to file MTR with what ever u have and write them letter to buy more time for other docs and make sure u file MTR with in 30 days .
I sent unauditted statements but my W2 nad paystubs were way more then i was supposed to get .
Wish u luck
Thank you for ur post. I checked my denial notice. There is no mention of MTR. It mentions that I can file an appeal with AAO within 30 days.
more...
srikondoji
07-02 01:55 PM
In the month of June, USCIS employees had too much of Red Bull during normal business hours, otherwise they wouldnot have become so efficient/robotic all of a sudden.
How on earth could they take 7-8 months for 80,000 approvals and then finish the 60,000 approvals in just less than a month?
Did DOS played a hardball with USCIS?
By making all current in the month of JULY, DOS might have blackmailed USCIS to act fast on pending applications. If not, DOS will overburden them by infinite I-485 applications from july onwards. Finally when USCIS did its job, DOS revised the bulletin and took back what they said a fornight ago.
Clearly, DOS and USCIS have lot to explain and come clean on the whole mess up. With no new information between june 14th and July 2nd, how could they turn 180 degrees?
Anyone with math 101 class could have imagined that making everybody current from july onwards was stupid. All they had to had to do was move the PD for just a month or two. But again, they did what they have done and we have to bear the consequences.
Allegations against DOS and USCIS heads
1) They have colluded with doctors and lawyers to make a quick buck.
2) They are 100% inefficient and need to shutdown their shops.
3) They have generated un-ethical profits for staples, gas stations, doctors, lawyers and airline companies and postal services.
There needs to be accountability on their part and own the mess and pay us back every penny.
I simply need my money back or they should come out and say that i can use my same application whenever the PDs become current. In the event that i loose my visa status and i have to leave this country due to any reason, they need to reimburse me all my money.
In just 2 weeks these guys have shattered my dreams.
I had so many plans and they are broken all of a sudden.
No wonder mexicans are smart by not following rules and then protest on streets.
Its time for civil disobedience.
How on earth could they take 7-8 months for 80,000 approvals and then finish the 60,000 approvals in just less than a month?
Did DOS played a hardball with USCIS?
By making all current in the month of JULY, DOS might have blackmailed USCIS to act fast on pending applications. If not, DOS will overburden them by infinite I-485 applications from july onwards. Finally when USCIS did its job, DOS revised the bulletin and took back what they said a fornight ago.
Clearly, DOS and USCIS have lot to explain and come clean on the whole mess up. With no new information between june 14th and July 2nd, how could they turn 180 degrees?
Anyone with math 101 class could have imagined that making everybody current from july onwards was stupid. All they had to had to do was move the PD for just a month or two. But again, they did what they have done and we have to bear the consequences.
Allegations against DOS and USCIS heads
1) They have colluded with doctors and lawyers to make a quick buck.
2) They are 100% inefficient and need to shutdown their shops.
3) They have generated un-ethical profits for staples, gas stations, doctors, lawyers and airline companies and postal services.
There needs to be accountability on their part and own the mess and pay us back every penny.
I simply need my money back or they should come out and say that i can use my same application whenever the PDs become current. In the event that i loose my visa status and i have to leave this country due to any reason, they need to reimburse me all my money.
In just 2 weeks these guys have shattered my dreams.
I had so many plans and they are broken all of a sudden.
No wonder mexicans are smart by not following rules and then protest on streets.
Its time for civil disobedience.
hot images veritas aequitas tattoos. veritas aequitas op 23:30; veritas aequitas
JP McMahon
November 10th, 2004, 08:19 AM
Have you tried inserting a different Compactflash card?
more...
house veritas aequitas tattoos,
dbevis
October 23rd, 2003, 11:41 PM
First, as a fellow engineer, I'll say that is no handicap to photography.
At the moment I took the shot, I was searching out textured and detailed objects to show me what the 100 Macro lens would be capable of resolving.
So, the left brain was hard at work being analytical and logical.
On another level, the structure brought back childhood memories of my grandparents' farmhouse.
On yet another level, I was facinated by all the small details - mortar, wrought iron fence, and the leaves turning colors.
Generally, these sorts of images are what I connect with, the ones that I can't quite (or at least instantly) figure out what I'm looking at. Is this a wall, a sculpture, are those windows or doorways am I inside looking out or outside looking in.
It's also worth noting that there is no trace of the "rule of thirds" in that image.
Much of the above applies to this one, which I put online this evening:
http://web.mw.net/dphoto.us/members/displayimage.php?album=13&pos=0
Don
At the moment I took the shot, I was searching out textured and detailed objects to show me what the 100 Macro lens would be capable of resolving.
So, the left brain was hard at work being analytical and logical.
On another level, the structure brought back childhood memories of my grandparents' farmhouse.
On yet another level, I was facinated by all the small details - mortar, wrought iron fence, and the leaves turning colors.
Generally, these sorts of images are what I connect with, the ones that I can't quite (or at least instantly) figure out what I'm looking at. Is this a wall, a sculpture, are those windows or doorways am I inside looking out or outside looking in.
It's also worth noting that there is no trace of the "rule of thirds" in that image.
Much of the above applies to this one, which I put online this evening:
http://web.mw.net/dphoto.us/members/displayimage.php?album=13&pos=0
Don
tattoo veritas aequitas op 15:17
valatharv
07-15 02:39 PM
I filed I-485 in Nov. 2007 and waiting.... :(
Problem is I noticed that name of my father in my passport is reversed example it shows <lastName> then <FirstName>.
But in my birth certificate it is vice versa <FirstName> then <lastName>....
I got the RFE in July 2009 for my date of birth certificate which I have provided to USCIS mentioning father name as in my birth certificate i.e. <FirstName> then <lastName>.
I renewed my passport in April 2010 and corrected father name, but in all the old forms before RFE, my father name shows as <lastName> then <FirstName>.
Will it be issue, I am frustrated and worried on what to do, is it going to have major impact on my GC processing as all the forms I have submitted to USCIS and my passport have my father name as <lastName> then
<FirstName>.
Please suggest I am very worried...
Thanks
Problem is I noticed that name of my father in my passport is reversed example it shows <lastName> then <FirstName>.
But in my birth certificate it is vice versa <FirstName> then <lastName>....
I got the RFE in July 2009 for my date of birth certificate which I have provided to USCIS mentioning father name as in my birth certificate i.e. <FirstName> then <lastName>.
I renewed my passport in April 2010 and corrected father name, but in all the old forms before RFE, my father name shows as <lastName> then <FirstName>.
Will it be issue, I am frustrated and worried on what to do, is it going to have major impact on my GC processing as all the forms I have submitted to USCIS and my passport have my father name as <lastName> then
<FirstName>.
Please suggest I am very worried...
Thanks
more...
pictures house veritas aequitas tattoo.
crazydesi
09-03 07:39 PM
# 8/29/2008 AILA Liaison Seeks Examples of Adjustment Cases Pending Security Checks (. 27 KB) AILA is collecting information in an effort to work with USCIS to identify adjustment of status applications that may be approvable as of October 1, 2008, when new visa numbers become available. The focus of this effort is those adjustment of status cases, which are approvable under the February 4, 2008, security check memo by Michael Aytes. AILA Doc. No. 08082968.
dresses VERITAS-AEQUITAS
pitha
06-28 03:12 PM
This is a very common issue. Most of the times the HR title and job title and Labor title do not match.
You need to use "Programmer Analyst" for Employment verification letter, but Employment offer letter, you need to use "Software Programmer Engineer".
This is 100% correct.
Employment verification letter is for current occupation what you mentioned in LCA when applying for H1. If you say something else, then you are voilating what you mentioned. Then it is going to problem if a strict USCIS officer observes that.
But for Employment offer letter, since it is for future emploment, you need to have the title mentioned in PERM application.
You need to use "Programmer Analyst" for Employment verification letter, but Employment offer letter, you need to use "Software Programmer Engineer".
This is 100% correct.
Employment verification letter is for current occupation what you mentioned in LCA when applying for H1. If you say something else, then you are voilating what you mentioned. Then it is going to problem if a strict USCIS officer observes that.
But for Employment offer letter, since it is for future emploment, you need to have the title mentioned in PERM application.
more...
makeup veritas aequitas tattoos. veritas aequitas tattoos.
andy garcia
02-23 11:05 AM
Here is e.g. for 2002 again this excludes schedule A here is the breakdown for india
EB1 - 3K
EB2 - 21K
EB3 - 17.5K
EB4 - 0.3K
EB5 - 0
EB Total - 41K
Am I missing something?
You are missing this:
The large number of LPRs in the EB in 2005 was primarily due to the AC21 Act of 2000, which recaptured 130,107 unused EB visa numbers from 1999 and 2000 to be made available to 1st, 2nd, and 3rd preference EB immigrants once the annual limit had been reached. Approximately 94,000 of those recaptured visa numbers were used in 2005. None of these visas were used in 2006. In addition, the REAL ID Act of 2005 recaptured 50,000 unused EB visas, 5,125 of which were used in 2005. In 2006, 33,341 of these visas were used, exceeding the 2006 employment preference limit of 143,949. The majority of the visa numbers recaptured by the REAL ID Act were issued to individuals whose country of origin was the Philippines (57 percent) or India (22 percent).
EB1 - 3K
EB2 - 21K
EB3 - 17.5K
EB4 - 0.3K
EB5 - 0
EB Total - 41K
Am I missing something?
You are missing this:
The large number of LPRs in the EB in 2005 was primarily due to the AC21 Act of 2000, which recaptured 130,107 unused EB visa numbers from 1999 and 2000 to be made available to 1st, 2nd, and 3rd preference EB immigrants once the annual limit had been reached. Approximately 94,000 of those recaptured visa numbers were used in 2005. None of these visas were used in 2006. In addition, the REAL ID Act of 2005 recaptured 50,000 unused EB visas, 5,125 of which were used in 2005. In 2006, 33,341 of these visas were used, exceeding the 2006 employment preference limit of 143,949. The majority of the visa numbers recaptured by the REAL ID Act were issued to individuals whose country of origin was the Philippines (57 percent) or India (22 percent).
girlfriend veritas aequitas tattoo.
RedHat
08-29 11:41 PM
Today i got REF regarding my GC .
USCIS is asking me to provide following:
1)All Documents pertaining to US immegration status. Including most recent I-94 , EAD, and all my H1 copies
2)Copies of all US Federal Tax retuns ever filed.
3)Copies of first and last pay stubs of all US employers.
4)Birth Ceritificatates
5)Marriage cetificate and cermony photos.
I have all documents except my first paycheck of the first employer.
I came to USA in the year of 1999 without my employer permision.
I stayed with frieds help without informing the my employer(who filed the H1B was not interested to bring me usa becuase market was not good). It took 8 months to get job after that i contact my employer and i was with him for 6 months and joined another company.
Only problem is , i stayed 8 months in the USA without job(without status).
Between 1999 to 2007 i visited inida 4 times without any issues.
USCIS is asking me submit my first paycheck. - I did not work first 8 months
Anyone can guide me how to handle this case?.
If i tell my employer was not paid first 8 months will that be any problem?
And what are chances of get my GC.
Please help!
USCIS is asking me to provide following:
1)All Documents pertaining to US immegration status. Including most recent I-94 , EAD, and all my H1 copies
2)Copies of all US Federal Tax retuns ever filed.
3)Copies of first and last pay stubs of all US employers.
4)Birth Ceritificatates
5)Marriage cetificate and cermony photos.
I have all documents except my first paycheck of the first employer.
I came to USA in the year of 1999 without my employer permision.
I stayed with frieds help without informing the my employer(who filed the H1B was not interested to bring me usa becuase market was not good). It took 8 months to get job after that i contact my employer and i was with him for 6 months and joined another company.
Only problem is , i stayed 8 months in the USA without job(without status).
Between 1999 to 2007 i visited inida 4 times without any issues.
USCIS is asking me submit my first paycheck. - I did not work first 8 months
Anyone can guide me how to handle this case?.
If i tell my employer was not paid first 8 months will that be any problem?
And what are chances of get my GC.
Please help!
hairstyles veritas aequitas tattoo.
casinoroyale
08-21 09:52 AM
Thanks, what a pain. I just did a Google Business search and did not find any branches of it in USA. Is there anyway we can get this done while in US? My appt is on Monday, this means I have to go to Canada on Friday to get this deposit slip? :mad:
Before I slowly forget all the various pain points from the past, I'm going to add this one detail that people usually neglect:
The new process requires you to deposit a the visa processing fees at a local branch of Nova Scotia Bank and get a deposit slip to submit with the visa application when you go into the consulate. Most banks open at 9 am - 10 am. So if you have an early appointment, be sure to go there the previous business day and get the fees stuff taken care of. If not, you will find yourself scrambling to get this done at the last minute.
Before I slowly forget all the various pain points from the past, I'm going to add this one detail that people usually neglect:
The new process requires you to deposit a the visa processing fees at a local branch of Nova Scotia Bank and get a deposit slip to submit with the visa application when you go into the consulate. Most banks open at 9 am - 10 am. So if you have an early appointment, be sure to go there the previous business day and get the fees stuff taken care of. If not, you will find yourself scrambling to get this done at the last minute.
dontcareanymore
08-24 11:50 AM
I lost the hope of GC after working 10 years in US because my GC is not approving.
Is it possible to file case against my employer and ask to return money that they deduct from me for GC and the % that they earned from me in last 8 years. I joined my employer for smooth GC process but even my I140 is not approved. My labor went to backlog. Once labor approved than I140 is pending for last 30 months. USCIS is trying to find out that my company is legitimate or not.
Do not argue how I know that I140 is pending because of company. Please let what is process to inform USCIS about my employer. My company files GC so that no one should leave the company. Employer gives hope about GC but I140 never approves. What all evidence I have to collect so that I can prove against my employer. Please suggest.
Settle down. You seem frustrated and perhaps justifiably so. But you are trying to blame every thing on the employer ( I am in no way trying to support fraudulent employers as much as I don't support fraudulent employees).
I did not check your PD. You will get your day....stay calm.
At least based on your post you agreed to get a percentage of your billing rate and agreed to pay for the GC expenses. [I don't think it is illegal (now) for employees to pay for GC expenses]. Your employer does not have control on how long the process would take and apparently they had spent money processing your GC.
Based on the facts you gave :
1) Your employer has been paying more than the salary mentioned in your contract.
2) You don't have any proof that you paid them for GC process.
3) You did not provide any information that suggests they are willfully delaying your case.
What do you think are the grounds on which you can go against them ? I guess you are free to leave the company any time if you think you are making too much money for them, and you want to take full advantage of your skills by going elsewhere....
Is it possible to file case against my employer and ask to return money that they deduct from me for GC and the % that they earned from me in last 8 years. I joined my employer for smooth GC process but even my I140 is not approved. My labor went to backlog. Once labor approved than I140 is pending for last 30 months. USCIS is trying to find out that my company is legitimate or not.
Do not argue how I know that I140 is pending because of company. Please let what is process to inform USCIS about my employer. My company files GC so that no one should leave the company. Employer gives hope about GC but I140 never approves. What all evidence I have to collect so that I can prove against my employer. Please suggest.
Settle down. You seem frustrated and perhaps justifiably so. But you are trying to blame every thing on the employer ( I am in no way trying to support fraudulent employers as much as I don't support fraudulent employees).
I did not check your PD. You will get your day....stay calm.
At least based on your post you agreed to get a percentage of your billing rate and agreed to pay for the GC expenses. [I don't think it is illegal (now) for employees to pay for GC expenses]. Your employer does not have control on how long the process would take and apparently they had spent money processing your GC.
Based on the facts you gave :
1) Your employer has been paying more than the salary mentioned in your contract.
2) You don't have any proof that you paid them for GC process.
3) You did not provide any information that suggests they are willfully delaying your case.
What do you think are the grounds on which you can go against them ? I guess you are free to leave the company any time if you think you are making too much money for them, and you want to take full advantage of your skills by going elsewhere....
ashokmohan
06-07 01:55 PM
Transaction ID: 7WK494028G568634H
No comments:
Post a Comment