Saturday, June 18, 2011

220 volt plugs

images 110/220 volt outlets, 220 volt plugs. Voltage (I use 220 Volt in
  • Voltage (I use 220 Volt in



  • indianabacklog
    12-04 06:50 PM
    A wife of one of my colleagues got her green card through marriage. They have now been married for over eight years and she simply visits at least once a year and on at least three occasions has only visited for a weekend.

    This gives you a good idea how little time you have to be here without losing your permanent residency.

    I also know of a research fellow who I used to work with. Has had his green card for almost twenty years and in that entire time has only visited for one conference each year and then for at most five days.

    If you want to progress to become a citizen this sort of arrangement will not work obviously but if you simply want to retain your green card it would appear to be remarkably easy.





    wallpaper Voltage (I use 220 Volt in 220 volt plugs. Light Neon Lamp (220 Volt)
  • Light Neon Lamp (220 Volt)



  • saimrathi
    07-02 06:00 PM
    There is hope....

    Was this your case? Did you get approved in two months? Whats your PD?





    220 volt plugs. player over to 220 volt,
  • player over to 220 volt,



  • pra945
    12-02 03:47 AM
    hello all,

    i attended for visa stamping on dec 1st at Hyderabad consulate so i got 221g yellow form but he retained passport with him. he told to submit all the documents that are mentioned on the yellow form. did any body got same thing. usually how many days they will take for processing after submiting the documents

    Thanks,
    Praveen





    2011 Light Neon Lamp (220 Volt) 220 volt plugs. hours (w/220 volt outlet)
  • hours (w/220 volt outlet)



  • DareYouFireMe
    03-09 03:03 PM
    My friend has 2 I-140s one EB3 (PD Dec 2002) and second one EB2 (PD Nov 2006) - what is the best option for him.

    Whether he can use earlier PD for EB2 (I-485).

    Please share your knowledge.



    more...


    220 volt plugs. into a 220 volt outlet.
  • into a 220 volt outlet.



  • indian1103
    05-01 10:03 AM
    akhil, It was regular. Hope am this lucky with my 485 too.





    220 volt plugs. Decals and Overlays
  • Decals and Overlays



  • cox
    August 24th, 2005, 05:38 AM
    I read in interesting piece by Bjorn Rorslett on this very subject of stacked polarizers... it is possible to achieve a sort of false color IR by stacking a Circular and Linear polarizing filters...

    I hadn't heard of that, I'll have to look it up. Thanks for sharing. :)



    more...


    220 volt plugs. 220 Volt 50Hz AC Output,
  • 220 Volt 50Hz AC Output,



  • WeShallOvercome
    11-05 12:59 PM
    All of you who could not apply for your spouses for any reason and now facing retrogression:

    Please Keep your spouse's application 100% ready with the exception of medical report before your date is officially current again and file it on the very first day that it is current.

    ==============
    Example:

    Your PD = May 2005 EB2

    July 2008 bulletin is released on 15th June 2008 making your PD current starting July 1st.

    You have about 15 days to prepare your spouse's application and also get his/her medicals done.

    Send it out on June 30th to be delivered on early morning July 1st 2008.

    This is to make sure the dependent's application reaches there BEFORE any chance of your application getting approved.

    ==============
    If you miss it YOUR app is approved before your spouse's app is filed, you are in for some complications.....

    I guess most of you already understand the importance of this, Just mentioning here for the benefit of those who don't..

    ==DO NOT GIVE USICS ANY CHANCE TO APPROVE YOUR APPLICATION BEFORE YOU FILE YOUR SPOUSE'S APPLICATION====





    2010 player over to 220 volt, 220 volt plugs. 110/220 volt outlets,
  • 110/220 volt outlets,



  • maddila
    07-30 02:31 PM
    One of my friends had the same problem from Madras consulate. they eventually called him to come back with the passport after 3 weeks. You will get it but it's just matter of time.........



    more...


    220 volt plugs. 220-240 volt 3 prong power
  • 220-240 volt 3 prong power



  • rolrblade
    04-03 07:45 AM
    I have the RFE, it doesn't state the exact instead mentions 12 weeks from the date of this letter. And the date of the letter is Jan 8, 2008

    I do not see any harm in replying to an RFE even if it is late. You should really be pushing your employer and attorney to respond to this RFE at the EARLIEST.

    It might also help to give a reason as to why you were late in responding.





    hair hours (w/220 volt outlet) 220 volt plugs. 1600 Watts, Converts 220 Volt
  • 1600 Watts, Converts 220 Volt



  • dallasdude
    09-25 04:42 PM
    They forgot to metion one more track, "Are you jewish?", as they have lots of programs for jewish people to migrate into united states. I was suprised to meet so many of so called jews in my office from all over the world (mainly from Russia, Ukarine and such..) who come in through those programs. They are eligible to apply for green card as soon as they enter United States and get it in no time. And can apply for citizenship after 5 years just like everyone else.

    So are the refugees from war torn countries.



    more...


    220 volt plugs. 220 volt power outlet
  • 220 volt power outlet



  • logiclife
    06-20 12:06 PM
    Fellows,

    I had my PERM labour and I-140 approved with priority date Dec 2005 in EB2 category. I changed my job in April and was hoping to get the priority date transferred to with new labour and I-140 from new employer. I have not started the GC process with new employer and am in good terms with old employer. With the priority dates being current for July (and probably for August too), what are the options I have:

    1. Filing new labour and pray to get approved before end of August. Then file for I-140 and I-485 concurrently. Do I stand a chance there, with advertisement publishing and other formalities?

    2. Can I file my I-485 with old employer while working with new employer. What are the documents I would need from old employer.

    3. If answer to question 2 is 'yes', do I need to go back and work for old employer ever (before or after getting green card)?

    Thanks


    (1) is surely an option if you think your prayers are strong enough. I wouldnt trust prayers when it comes to immigration process.

    About options (2) and (3), its surely a great option. Contact your ex employer and file the greencard thru him. When I say "Thru him" all you need from him is a letter on company letter head from the boss/HR that still intend to hire you when you get your greencard. Other than that, it is possible to do the whole thing by yourself either thru your own lawyer or by doing it yourself. Its not rocket science. If you have a good lawyer, go thru him.

    BEFORE YOUR GC IS APPROVED:

    Also, keep in mind that you dont have to start working for him just because he is filing your 485 based on labor/140 that he sponsored. You can continue working where you are working right now. GC is for future employment. (However if you also apply for EAD, then maybe you have to join the ex employer who files your 485 at least during the intial 180 days after 485 is filed, please do check with your lawyer). Also, one last thing if you go thru this route. You need to maintain good relations with this employer if he files your 485 at least for 180 days after its filed. That's because you need him to write a letter that "yes I intend to hire this guy" should USCIS ask him that again during the intial 180 days. After 180 days have passed, if USCIS asks and sends RFE about "who is going to hire you after getting GC", you can exercise your AC21 option and produce a letter from your current employer (whomever you are working for at the time) that they intend to keep your employed after you get GC.


    AFTER YOUR GC IS APPROVED:

    Now, about having to work for your ex-employer because you filing 485 based on approved labor and 140 that was sponsored by your ex-employer, here is the deal : If 180 days have passed since your 485 is pending and if your greencard is approved after that (after 180 days of 485 filing) then you do not have to go back to your ex-employer. That's because the option of using AC21 portability is available only AFTER 180 days, not before that. Now, if your 485 gets approved in less than 180 days (which is unlikely because they are never that fast and plus the dates have to be current), then YES, you have to go to work for your employer for at least a couple of months as soon as your 485 is approved. However, the chances of the situation coming to that is very unlikely. I dont think anyone is going to get their 485 approved in less than 180 days.





    hot into a 220 volt outlet. 220 volt plugs. 220-250 VOLT SURGE PROTECTOR
  • 220-250 VOLT SURGE PROTECTOR



  • Beemar
    01-31 10:42 PM
    I feel stupid replying to this totally irrelevant thread, but I will reply any way. Your bill is for two and a half months duration. That makes it a monthly bill of around $350-360 or so. These are winter months, meaning you must be operating heater full time. If you heater is on a "always on" setting instead of "auto" setting, and you happen to keep any windows in your apartment open all the time,then that alone is sufficient to do you for. Also, if your kitchen burners/oven run on electricity instead of gas, that could also jack up the bill. Taking into account all these factors, it does not sound all that unreasonable, does it? Just check these points before shouting murder.



    more...


    house done at a 220-volt outlet. 220 volt plugs. Heater for European 220 Volt
  • Heater for European 220 Volt



  • H1bslave
    04-16 12:45 PM
    I am willing to move to Flower Mound, TX. Any info will be greatly appreciated!





    tattoo Decals and Overlays 220 volt plugs. 110 volt and 220 volt) for
  • 110 volt and 220 volt) for



  • smitin_2000
    02-09 11:34 PM
    Hi,

    I have issue with I-94 as visa office at LA - LAX port of entry put a date in I-94 as same as in visa stamp in passport and not the date in the I-797 (extended H1B approval notice), I realised it 2months after the I-94 expiry, means while I was moved to Bay Area in CA, so I took infopass appointment from uscis.gov site for San Francisco office, went there and explained the matter to the visa officer, they corrected the error and issued me new I-94 with the date in I-797, you can also try the same, I think your issue will be fixed.

    Best of luck

    CBP office location link in CA
    LA - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_south_pacific.xml
    San Diego - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_s_ca.xml
    San Francisco - http://www.cbp.gov/xp/cgov/toolbox/contacts/cmcs/cmc_mid_pac.xml

    Regards,
    Smitin



    more...


    pictures 220 Volt 50Hz AC Output, 220 volt plugs. I just arrived and plug looks
  • I just arrived and plug looks



  • CatsintheCraddle
    05-04 05:07 PM
    Oh, by the way, I did not file for I-140, I went filed I-130 based on marriage to a US citizen. Thanks for the link but I couldn't find anything on my kind of case.





    dresses 220-250 VOLT SURGE PROTECTOR 220 volt plugs. 220 volt outlet available
  • 220 volt outlet available



  • ArkBird
    07-29 05:23 PM
    Are you looking for specific language? How was similar defined from your attorney?

    Job description in Paper posting / ( I don't have I-140 in front of me but i assume the same) is:

    SYSTEMS ANALYST

    JOB DESCRIPTION:

    Systems analysis in connection with development of technical and detailed design including application processes, interfaces and database design. Test, maintain, monitor, and program software applications.

    JOB REQUIREMENTS:

    1. Bachelor's degree in Computer Science.
    2. Education and/or experience must include Visual Basic, SQL, Relational Database, XML, and ASP.


    The new job is: Director of Software Development

    � Execute the company�s technology architecture and strategy.
    � Foster a strong work environment that rewards individual and team efforts and encourages creativity, while maintaining high caliber productivity.
    � Prepare detailed project development work plans for scheduled software product releases and ad hoc software development projects.
    � Oversee project schedules and supervise staff and consultants assigned to specific projects to ensure high quality results and timely completion of all projects within budgetary guidelines.
    � Support the division�s Product Definition group by participating in requirements planning, data modeling, and business process walk-throughs to ensure proper transition from business requirements to development of the required software components.
    � Provide leadership and management for a team of SW Engineers, QA Analysts, and additional technology professionals and consultants.
    � Implement solutions using modern methods in SOA, OOP/OOD, Enterprise level architecture, and familiarity with UML and Case tools.
    � Travel approximately 25% of the time to both in-country and international destinations.
    � Perform other duties as assigned by the VP of Software Development



    Here is my job description and I just used AC-21 and now I am working as Sr. Director - SW Development


    Design, develops, modifies, debugs and evaluates programs for use in internal and external systems within functional areas, including but not limited to finance, human resources, manufacturing and marketing. Develop and maintain positive business relationship with internal clients. Analyzes existing programs or formulates logic for new systems, devises logic procedures, prepares flowcharting, performs coding and tests/debugs programs. Perform complex technical system application. Develops conversion and system implementation plans. Prepares and obtains approval of system and programming documentation. Recommends changes in development, maintenance and system standards. Coordinate, Supervise and Lead personnel on integrated projects. Continuously strives to identify and improve business strategies and solutions. Train users in conversion and implementation of system



    more...


    makeup 220-240 volt 3 prong power 220 volt plugs. done at a 220-volt outlet.
  • done at a 220-volt outlet.



  • coopheal
    05-06 12:39 PM
    Transaction ID: 15509419M155420

    You sent a payment of $100.00 USD to Immigration Voice (donations@immigrationvoice.org)

    It may take a few moments for this transaction to appear in your account.

    Thanks





    girlfriend 110 volt and 220 volt) for 220 volt plugs. Plug the vehicle into a 220
  • Plug the vehicle into a 220



  • GCwaitforever
    07-19 04:00 PM
    Congratulations.





    hairstyles 220 volt power outlet 220 volt plugs. 220 Volt 50 ft 10-3 Extension
  • 220 Volt 50 ft 10-3 Extension



  • meridiani.planum
    07-23 05:25 AM
    Hi Thanks for your inputs.

    But both the employers are consultant.
    One is in Fremont CA and other in Pittsburg. Both are offering almost same salary.
    So which should be an better option, if they have a similar better client list?

    IMO both are fairly decent places to work. I work in the bay area and Fremont is close by. Lots of tech companies here, so in general job market is ok. However cost of living is very high. Certainly more than pittsburg.
    I think its a fairly close call, I would tend a bit towards the Fremont one only because I guess I am a bit biased to the bay area :)





    irrational
    04-04 02:34 PM
    Our company went with a cheapo attorney.

    But, from the lessons I learnt over time, WE have to be monitoring all these even if there is an attorney, since ultimately its our life which will be miserable. :o





    somegchuh
    10-31 05:26 PM
    Thanks everyone for the input. Does anyone know if they issue the renewed EAD starting at the end of the current EAD or does the renewed EAD start on the day the case gets updated? If the answer is latter then I don't want to bother pushing the lawyer (not that they care anyways ;-)

    my lawyer said that if anyone uses EAD to work or planning to use EAD soon (not H1B) then it is better to apply for EAD renewal before 6 months of current one expires. If you are in H1B not planning to use EAD even in future then you can renew it 3-4 months before expiry.



    No comments:

    Post a Comment